Connect with us


The cheapest model can now be pre-ordered



The cheapest model can now be pre-ordered

In the summer, I already reported on the Bambu Lab X1 series, a 3D printer with a treat or two and the Bambu Lab flagship. With the Bambu Lab P1P, the manufacturer now adds another model to its portfolio. It is cheaper and can now be pre-ordered for 659 EUR plus VAT. Bambu Lab specifies that pre-orders will then be shipped from a European warehouse. But what is in the Bambu Lab P1P.

The Bambu Lab P1P comes with a high quality steel frame. The printer is ready to use within 15 minutes of unpacking. With an acceleration of 20000 mm/s2 and a print speed of 500mm/s, 3D printing is fast fun too. Vibration compensation and filament pressure adjustments in the nozzle promise more consistent print results. Another special feature: the printer is also equipped for multi-color printing using the separately available AMS add-on. Other accessories also prepare the 3D printer for further upgrades. The maximum print size is 256 x 256 x 256 mm.

Nice story: you can design and customize the side panels yourself. Printable files and templates will be available for this from December 5th. The printer has a Wi-Fi and Bluetooth connection and can therefore be controlled via an app.

Cost of the P1P: 659 euros and therefore certainly not the cheapest model, but the equipment should not be bad parents either. The delivery of the first batch should then take place in January 2023.

The technical details:

Article specification
Printing technology Modeling of molten deposits
body Build Volume (W×D×H) 256*256*256mm³
frame Steel
shell printable
tool head hot ending all metal
extruder gears Steel
nozzle stainless steel
Maximum hot end temperature 300
Nozzle diameter (included) 0.4mm
Nozzle diameter (optional) 0.2mm, 0.6mm, 0.8mm
filament cutter yes
filament diameter 1.75mm
warm bed Build plate (included) Bamboo Double Sided Textured PEI Plate
Build plate (optional) Bamboo cold plate
Bamboo engineering plate
Bamboo high temperature plate
Maximum build plate temperature 100
the rapidity Tool head maximum speed 500mm/s
Tool head maximum acceleration 20m/s²
Maximum hot end flow 32 mm³/s @ABS(Model: 150*150mm single wall; Material: Bambu ABS; Temperature: 280?)
cooling Partial cooling fan Closed loop control
Hot end fan Closed loop control
Auxiliary room cooling fan Optional
supported filament PLA, PETG, TPU, ASA, PVA, PET ideal
PA, PC, ABS Able
Carbon fiber/glass reinforced polymer Not recommended
sensors Room surveillance camera 1280 x 720 / 0.5 ips low speed camera (optional)
Accelerated Supported
End of filament sensor yes
Filament Odometry Optional with AMS
Power loss recovery yes
physical dimensions Dimensions (W×D×H) 386*389*458mm
net weight 9.65kg
Electrical parameters Input voltage 100-240 VAC 50/60 Hz
maximum energy 1000W@220V 350W@110V
USB output power 5V/1.5A
Electronic filter 2.7 inch 192×64 screen
Connectivity Wi-Fi, bluetooth, bamboo bus
Storage MicroSD card
control interface Button, APP, PC APP
motion controllers Dual Core Cortex M4
Software slicers Bamboo Studio
Supports third-party slicers that export standard G-code such as Superslicer, Prusaslicer, and Cura, but some advanced features may not be supported.
Operating system supported by Slicer MacOS, Windows

This article contains affiliate links, so we mark it as advertisement. By clicking on it, you will directly access the supplier. If you decide to make a purchase there, we will receive a small commission. Nothing changes in the price for you. Thank you for your support!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *